DROK Signal G

#ad
DROK #ad - Product parameters: output current: 3-21ma Power supply voltage: 15-30V Sampling impedance: 10-500ohm Display accuracy: 005 output accuracy: +/-05% overall dimension front: 79. 5*42mm overall dimension back: 72. 5*39. 5mm mounting panel / case opening dimension: 77*40mm two working Modes: ●Manual Mode ●Dynamic output mode Package Includes: 1* 4-20mA Signal Generator Clear lcd digital display.

#ad



4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

#ad
DROK #ad - At this time, you can adjust the voltage display adjusting potentiometer to make the display value equal to the actual output value. Package includes: 1* signal generator amp & volt dual signal generator: multifunctional drok signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 - 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy.

Clear led display: our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. If the display is accurate, you can calibrate the display value of current voltage by yourself. Wide application: our signal adapter can be used as signal generator, panel debugging, valve adjustment, PLC debugging, LED testing, inverter control, simulating the output of transmitter.

At this time, you can adjust the current display adjusting potentiometer to make the display value equal to the actual output value. Current display calibration clockwise rotating the multi-cycle potentiometer to the maximum, switching the display switch to the right and then using a multimeter to test the actual value of the output current.

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing #ad - Product features: by rotating a multi-cycle precise potentiometer, which can used as signal generator, PLC debugging, panel debugging, inverter control, this product can generate 0/4 - 20mA current signal and 0-10V voltage signal, LED testing, valve adjustment, simulating the output of transmitter. Product parameters: working voltage: dc24v input signal: Potentiometer Output signal: 0/4-20mA or 0-10V Display accuracy: Current: 0

1ma; voltage: 0

#ad



UCTRONICS DC 0-10V 0/4-20mA Current Voltage Signal Generator, USB Power Supply Interface Analog Simulator for PLC and Panel Debugging, Device Testing, Frequency Converter, Flow Valve

#ad
UCTRONICS #ad - What's more, it can display 4 different types of digit, 0-10V voltage, 0-22mA current, 0-100 percent and 0-50HZ. Amp & volt dual signal generator: multifunctional drok signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 - 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy.

Clear led display: our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. It will play a important role in your electronics work. This item does not include any battery inside. Note: optional 803040 battery expansibility battery not included.

UCTRONICS DC 0-10V 0/4-20mA Current Voltage Signal Generator, USB Power Supply Interface Analog Simulator for PLC and Panel Debugging, Device Testing, Frequency Converter, Flow Valve #ad - If the display is accurate, you can calibrate the display value of current voltage by yourself. Wide application: our signal adapter can be used as signal generator, PLC debugging, panel debugging, inverter control, LED testing, valve adjustment, simulating the output of transmitter. Power supply: external micro usb-5v or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time.

Voltage output: 0-10v, precision is 001v, rotate the encoder knob to adjust output voltage, can be calibrated. Current output: 0-22ma, rotate the encoder knob to adjust output current, precision is 0

#ad



1943385 - MEAN WELL MDR-20-24 AC to DC DIN-Rail Power Supply, 24V, 1 Amp, 24W, 1.5"

#ad
MEAN WELL 1943385 #ad - Amp & volt dual signal generator: multifunctional drok signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 - 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy. Clear led display: our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage.

If the display is accurate, you can calibrate the display value of current voltage by yourself. Wide application: our signal adapter can be used as signal generator, inverter control, panel debugging, valve adjustment, LED testing, PLC debugging, simulating the output of transmitter. Power supply: external micro usb-5v or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time.

1943385 - MEAN WELL MDR-20-24 AC to DC DIN-Rail Power Supply, 24V, 1 Amp, 24W, 1.5" #ad - Voltage output: 0-10v, precision is 001v, rotate the encoder knob to adjust output voltage, can be calibrated. Current output: 0-22ma, rotate the encoder knob to adjust output current, precision is 001ma, can be calibrated. Multiple display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.

Product dimension: 3. 94" x 2.

#ad



MEAN WELL MDR-60-24 DIN-Rail Power Supply 24V 2.5 Amp 60W

#ad
MEAN WELL MDR-60-24 #ad - Please search asin "b07pckCV5K" to get built-in battery generator. Power - specs out with 24 volts at 1a current rating and has a universal ac input range; Gone through 100% full load burn-in tests; Input voltage 85~264VAC / 120~370VDC at 47-63Hz, switch-selectable. Money back guarantee - if, for whatever reason, you are unsatisfied with your purchase you may return it for a full refund.

. If the display is accurate, you can calibrate the display value of current voltage by yourself. Wide application: our signal adapter can be used as signal generator, panel debugging, valve adjustment, PLC debugging, LED testing, inverter control, simulating the output of transmitter. Power supply: external micro usb-5v or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time.

MEAN WELL MDR-60-24 DIN-Rail Power Supply 24V 2.5 Amp 60W #ad - Voltage output: 0-10v, precision is 001v, rotate the encoder knob to adjust output voltage, can be calibrated. Current output: 0-22ma, rotate the encoder knob to adjust output current, precision is 001ma, can be calibrated. Multiple display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.

Product dimension: 3. 94" x 2.

#ad



DROK 0.5" 0-20.0mA Milliamp Meter Panel Ampere Meter Red LED Tester Electrical Current Measure

#ad
DROK 100022 #ad - DROK 0.5" 0-20.0mA Milliamp Meter Panel Ampere Meter Red LED Tester Electrical Current Measure #ad - Features: dimensions: 79 × 43 × 25 mm Installation size: 75 x 39. 5 mm measure range:DC 0-200ma operating voltage: dc +5 V ± 5% Operating Current:.

#ad



WHDTS Adjustable Signal Generator, 1Hz-150KHz 1-Channel PWM Pulse Frequency DC 3.3V-30V 5-30mA LCD Display Module

#ad
WHDTS #ad - We pride ourselves on high quality product and promise you the best. Pwm signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing which is widely used in production practice and technology.

WHDTS Adjustable Signal Generator, 1Hz-150KHz 1-Channel PWM Pulse Frequency DC 3.3V-30V 5-30mA LCD Display Module #ad - Parameters: Work voltage:DC 3. 3v-30v frequency range:1hz~150KHz Frequency accuracy:2% Duty cycle range:000%-100% output current:about 5-30ma output amplitude:same to input voltage size:79*43*27mm operating temperature:-20℃~70℃Four Frequency Range:Enter the setting interface after press any button 'FREQ+' or 'FREQ-' in the normal running status to select frequency rangePay attention to the position where the decimal point moves after the button is pressed.

Display 'XXX'. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999HzDisplay 'X. Xx'. The decimal point is the penultimate, The minimum frequency is 001khz. The frequency range is 1. 00khz ~ 9. 99khzdisplay 'XX.

#ad



Uxcell a11052500ux0047 0-20mA Analog DC Current Panel Meter Ammeter 85C1-A

#ad
uxcell a11052500ux0047 #ad - Note: optional 803040 battery expansibility battery not included. If the display is accurate, you can calibrate the display value of current voltage by yourself. Wide application: our signal adapter can be used as signal generator, PLC debugging, panel debugging, inverter control, LED testing, valve adjustment, simulating the output of transmitter.

Power supply: external micro usb-5v or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time. Voltage output: 0-10v, precision is 001v, rotate the encoder knob to adjust output voltage, can be calibrated. Current output: 0-22ma, rotate the encoder knob to adjust output current, precision is 0

Uxcell a11052500ux0047 0-20mA Analog DC Current Panel Meter Ammeter 85C1-A #ad - 01ma, can be calibrated. Multiple display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display. Product dimension: 3. 94" x 2. 36" x 098" 100mm x 60mm x 25mm, portable and convenient. Family: mdr-60 Maximum output power w: 60

#ad



KNACRO Adjustable Current Voltage Analog Simulator, 0-20mA Signal Generator, DC 0-10V 4-20mA Changeable Current Source for Valve Adjusting PLC Panel LED Testing, Transmitter Output Simulation

#ad
KNACRO #ad - If the display is accurate, you can calibrate the display value of current voltage by yourself. Wide application: our signal adapter can be used as signal generator, panel debugging, inverter control, valve adjustment, PLC debugging, LED testing, simulating the output of transmitter. Power supply: external micro usb-5v or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time.

Voltage output: 0-10v, precision is 001v, rotate the encoder knob to adjust output voltage, can be calibrated. Current output: 0-22ma, rotate the encoder knob to adjust output current, precision is 001ma, can be calibrated. Multiple display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.

KNACRO Adjustable Current Voltage Analog Simulator, 0-20mA Signal Generator, DC 0-10V 4-20mA Changeable Current Source for Valve Adjusting PLC Panel LED Testing, Transmitter Output Simulation #ad - Product dimension: 3. 94" x 2. 36" x 098" 100mm x 60mm x 25mm, portable and convenient. Support uart, dc 3. 3v-30v voltage, 5-30mA output current. By rotating a multi-cycle precise potentiometer, which can used as signal generator, inverter control, panel debugging, PLC debugging, valve adjustment, LED testing, this product can generate 0/4 - 20mA current signal and 0-10V voltage signal, simulating the output of transmitter.

#ad



DROK Current to Voltage Converter Module Amp to Volt 0 4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Converter Board

#ad
DROK 200327 #ad - You just need to push the switch below the monitor easy to switch the display. Amp & volt display calibration: there are current and voltage display calibrating potentiometer on the back of the module. 85c1-a;measuring current Range : DC 0-20mA. If the display is accurate, you can calibrate the display value of current voltage by yourself.

Wide application: our signal adapter can be used as signal generator, valve adjustment, PLC debugging, panel debugging, LED testing, inverter control, simulating the output of transmitter. This module is designed for that voltage signal will become weaker with the increase of transmission distance through the process of circuit signal transmission, this module can avoid it.

DROK Current to Voltage Converter Module Amp to Volt 0 4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Converter Board #ad - Drok voltage transmitter will be powered by 7-36v, current input range is 4-20mA/0-20mA, voltage output range is 0-3. 3v/0-5v/0-10v. Zero and full range can be adjusted as your needs; the module is with high stability, good linearity, industrial grade. The current signal sampling resistor using high-precision color ring resistance, offers high accuracy, small temperature drift and high power.

Drok signal converter is designed with reverse connection protection, if wires connect reversely, it will protect the module from burning. Accuracy : class 2. 5;meter face sizeapprox.

#ad



MEAN WELL EDR-120-24 Single Output DIN Rail Power Supply 24V 5 Amp 120W

#ad
MEAN WELL EDR-120-24 #ad - Single output din rail power supply 24 volts 5 amps 120 watts 24 volts 5 Amps specifications output power W: 120 ripple & noise mV p-p: 100 load regulation : 1 percent line regulation : 05 percent efficiency: 87. 5 percent size L x W x H inches: 4. 5 x 1. 6 x 4. 9 universal ac input/full range built-in active pfc function protections: short circuit, over voltage, overload, over temperature cooling by free air convection 100 percent full load burn-in Test 2 year warranty detailed specifications: primary output voltage VDC: 24 output current a: 5 maximum output power W: 120 family: edr-120 input voltage VAC: 90 to 264 input frequency: 47 to 63 maximum input current a: 2.

25 output connector Type: screw terminal efficiency percent : 87. 5 operating temperature-min ceL: -20 operating temperature-max CEL: 60 Length inch: 1. 57 width inch: 4. 93 height inch: 4. 47 agency approvals: ul/cul/TUV/CB/CE color: silver style: DIN. Primary output voltage vdc: 24. Note: optional 803040 battery expansibility battery not included.

MEAN WELL EDR-120-24 Single Output DIN Rail Power Supply 24V 5 Amp 120W #ad - Wider application: square wave signal generator, generating square wave signal for experimental development;generating square wave signal that controls the motor driver; Generating adjustable pulses for MCU and so on. Family: mdr-60

#ad