As an Amazon Associate I earn from qualifying purchases.
Peachtree Woodworking Supply #ad - We all know how residue left on a table saw can be rather irritating and even harder to remove. Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table.
This makes it ideal for sleds where repetitive sliding happens regularly. Its also very slick in comparison to wood and other plastics. Even though its "slick", it does not leave behind any residue which means no clean up after use.
We all know how residue left on a table saw can be rather irritating and even harder to remove. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. Length of bar may vary slightly. Made in the usa!
Peachtree Woodworking Supply #ad - Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove. Use this uhmw to make jigs and fixtures for your table saw, etc.
We all know how residue left on a table saw can be rather irritating and even harder to remove. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics.
We all know how residue left on a table saw can be rather irritating and harder to remove. Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use. This makes it ideal for sleds where repetitive sliding happens regularly. Its also very slick in comparison to wood and other plastics. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, router table, band saw or router table. Ideal for sleds where repetitive sliding happens regularly.
Hatsbi #ad - Jigs, fixtures or miter slots 3/4” x 3/8” – ideal for table saw, band saw or router table. Excellent sliding material - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary.
Predrilled holes - each bar has 10 exact size designed predrilled and countersunk holes for 20 specific sized screws included that ensures no expanding of the material when screws are inserted.
Uhmw won’t expand or contract like wood does. Extremely durable – ideal for constant repetitive use. The non-stick surface is easy to clean. Outstanding impact strength - even at low temperatures. Uhmw bars won’t leave any residue, dust or shavings. Very slick and self lubricating – very high abrasion resistance.
Fulton #ad - You may also have had the need to make repetitive cuts of the same length. Each kit comes with 2 each 19” long by 3/4” by 3/8” uhmw bars, 2 each 12” long mini tracks, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes.
Uhmw bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. Uhmw bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut. Please note, 1 each knob, the bars do NOT FIT RYOBI table saw track slots.
Halder #ad - Noise-dampening and gentle on the joints. Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle. Handle and inserts replaceable. Non-rebound, for extra powerful strikes.
MICRO JIG #ad - A true microjIG Innovation. Work with small stock safely on the table saw, Jointer, Router table, & Band saw. Precision cutting and control down to 1/4" Ripping.
MICRO JIG #ad - The zeroplay miter bar takes miter bars and table saw sleds to the next level of precision. By using the one-touch calibration you instantly fill the full width of the miter slot no side-to-side.
O'SKOOL #ad - 10 piece brass Template Guide Kit. Center hole. Kit includes 2 lock nuts & 8pcbushing guide 5/16", 1/2", 3/4", 3/8", 7/16", 5/8", 5/16", 1" .
1. Peachtree Woodworking Supply
#adFixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws, UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs, Router Table and Bandsaws 2 UHMW Bars
#adThis makes it ideal for sleds where repetitive sliding happens regularly. Its also very slick in comparison to wood and other plastics. Even though its "slick", it does not leave behind any residue which means no clean up after use.
More information #ad
Use this uhmw to make jigs and fixtures for your table saw, router table, etc. Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000 to 6, 000, 000, 000. We all know how residue left on a table saw can be rather irritating and even harder to remove. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. Length of bar may vary slightly. Made in the usa!
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | 1120 |
| Model | 11520 |
More information #ad
2. Peachtree Woodworking Supply
#adRouter Table and Bandsaws 2 UHMW Bars, Fixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws, UHMW Precision Milled Bar 3/4" X 3/8" X 48" For Jigs
#adWe all know how residue left on a table saw can be rather irritating and even harder to remove. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics.
More information #ad
Even though its "slick", it does NOT leave behind any residue which means no clean up after use. Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000, 000, 000 to 6, 000. We all know how residue left on a table saw can be rather irritating and harder to remove. Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use. This makes it ideal for sleds where repetitive sliding happens regularly. Its also very slick in comparison to wood and other plastics. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, router table, band saw or router table. Ideal for sleds where repetitive sliding happens regularly.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodoworking Supply Inc. #ad |
| Part Number | PW1121 |
More information #ad
3. Hatsbi
#adHatsbi UHMW Crosscut Sled For Table Saw Sled Miter Bars 3/4" X 3/8" X 36" -Predrilled holes and 20 screws included For Jigs Fixtures or Miter Slots size 3/4"x3/8" 2 UHMW Bars
#adPredrilled holes - each bar has 10 exact size designed predrilled and countersunk holes for 20 specific sized screws included that ensures no expanding of the material when screws are inserted.
More information #ad
Does not absorb moisture and will not swell up over time due to exposure. Uhmw ultra high molecular weight Polymer plastic is 10 times heavier than regular high-density polyethylene for stability. Uhmw won’t expand or contract like wood does. Extremely durable – ideal for constant repetitive use. The non-stick surface is easy to clean. Outstanding impact strength - even at low temperatures. Uhmw bars won’t leave any residue, dust or shavings. Very slick and self lubricating – very high abrasion resistance.
| Brand | Hatsbi #ad |
| Manufacturer | Lurentice Trading Ltd #ad |
| Height | 0.78 Inches |
| Length | 36 Inches |
| Width | 0.78 Inches |
| Part Number | QD2102001 |
More information #ad
4. Fulton
#adFulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
#adUhmw bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
More information #ad
Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Some time ago we noticed a lot of companies had uhmw bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. Uhmw bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut. Please note, 1 each knob, the bars do NOT FIT RYOBI table saw track slots.
| Brand | Fulton #ad |
| Manufacturer | Fulton Woodworking Tools and Accessories #ad |
| Weight | 0.84 pounds |
| Part Number | 11577 |
| Model | 11577 |
More information #ad
5. Peachtree Woodworking Supply
#adPeachtree 1123 UHMW Sheet 3/8" x 4" x 48"
#adPeachtree Woodworking Supply #ad - The highest abrasion resistance. Ideal for making sleds for your table saw or router table. Outstanding impact strength even at low temperatures. Self-lubricating, easily machined with common woodworking tools. Excellent sliding material due to low coefficient of friction.More information #ad
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | PW1123 |
More information #ad
6. Halder
#adHalder USA, Supercraft Dead Blow 3366.081
#adMore information #ad
Completely robot-welded. Inserts made of special nylon with maximum strength. Available in sizes ranging from D20mm to D80mm and as a sledge hammer weighing up to 9, 300g. Handle protection sleeve acts as an overstrike protector.| Brand | Halder #ad |
| Manufacturer | Halder USA #ad |
| Height | 3.23 Inches |
| Length | 35 Inches |
| Weight | 9.72 Pounds |
| Width | 7.5 Inches |
| Part Number | 3366.081 |
| Model | 3366.081 |
| Warranty | Manufacturers Warranty |
More information #ad
7. MICRO JIG
#adMICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
#adMore information #ad
Designed in usa. Powerful high-friction durable grip for extreme hold. Protect hands and prevent kickback like never before. Fully adjustable for easy handling. 3-directional Force for total control of the workpiece.| Brand | MICRO JIG #ad |
| Manufacturer | MICROJIG, Inc. #ad |
| Height | 4.5 Inches |
| Length | 7 Inches |
| Weight | 1.5 Pounds |
| Width | 4.5 Inches |
| Part Number | GR-100 |
| Model | GR-100 |
| Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
8. MICRO JIG
#adMICROJIG GRR-RIPPER ZP9-B2S2 Zeroplay Miter Bar 2 Piece,
#adMore information #ad
The top down installation lets you keep your sled square to the fence while you secure the ZEROPLAY Miter bar for a hassle-free setup and precision cuts. Build perfectly Square Crosscut Sleds Fast.| Brand | MICRO JIG #ad |
| Manufacturer | MICROJIG, Inc. #ad |
| Height | 1 Inches |
| Length | 10 Inches |
| Weight | 0.26 Pounds |
| Width | 1 Inches |
| Part Number | ZP9-B2S2 |
| Model | ZP9-B2S2 |
| Warranty | Extended 3-Year Warranty from Authorized Resellers |
More information #ad
9. Peachtree Woodworking
#adUHMW Sheet 3/4" x 4" x48" by Peachtree Woodworking, PW1125
#adPeachtree Woodworking #ad - Size is is apx 3/4" x 4" x 48". The highest abrasion resistance. Available in several thicknesses. Outstanding impact strength even at low temperatures. Self-lubricating, easily machined with common woodworking tools. Excellent sliding material due to low coefficient of friction.More information #ad
| Brand | Peachtree Woodworking #ad |
| Manufacturer | Peachtree Woodworking #ad |
| Part Number | PW1125 |
| Model | PW1125 |
More information #ad
10. O'SKOOL
#adO'SKOOL 10 pcs Brass Router Template Bushing Guides Sets Fit Any Router Sub-Base of The Porter Cable Style
#adMore information #ad
Sturdy blow-Molded carrying and storage case. Fits routers with Porter Cable style sub bases. Universal design fits any router having a base plate with a 1-3/16"* dia.| Brand | O'SKOOL #ad |
| Manufacturer | O'skool #ad |
| Height | 1.97 Inches |
| Length | 8.46 Inches |
| Weight | 0.55 Pounds |
| Width | 6.5 Inches |
| Part Number | RA02 |
| Model | RA02 |
More information #ad
