Trial Unit – Smooth-On OOMOO 25 Silicone Moldmaking Rubber

#ad
Smooth-On, Inc. #ad - Trial Unit - Smooth-On OOMOO 25 Silicone Moldmaking Rubber #ad - Liquid rubber. Smooth-on Oomoo Silicone Rubber. Smooth-on oomoo 25 trial unit 2 Pint Kit - Tin cure Silicone.

#ad



Trial Unit - Smooth-Cast 300 Liquid Plastic Compound

#ad
Smooth-On, Inc. SC300 #ad - It offers the convenience of a one to one mix ratio by volume. Read msds before use - Adult Supervision Required. Keep out of the reach of Children - for more information visit www. Smooth-on. Com ultra-low viscosity casting resin with bright white color. Shore 70D. Mix ratio: 1a: 1B by Volume. Smooth cast 300 is a liquid plastic, ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free.

Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Vacuum degassing is not necessary. 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable.

#ad



2 Pints - FAST Curing Mold Making Silicone Kit - Smooth-On OOMOO 25 - EASY!

#ad
Smooth-On SMOoomoo25 #ad - Great for craft moldmaking, home remodeling, replicas, jewelry, candles, and more!. East to use, equal parts A and B. Vacuum degassing is usually not necessary. No scale required. Oomoo 25 - fast setting 75 minute cure time. Takes excellent detail. Oomoo® 25 features a 15-minute pot life and 75 minute cure time.

Shore 70D. Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Cures at room temperature. Easy to use 1:1 by volume ratio. Cures to an opaque blue-lavendar. This silicone is easy to work with and has a very low viscosity for easy mixing and pouring.

2 Pints - FAST Curing Mold Making Silicone Kit - Smooth-On OOMOO 25 - EASY! #ad - Smooth-on oomoo 25 2 pint kit contains 1 pint of part a and 1 pint of Part B OOMOO® Silicone Rubber - No Scale or Vacuum Chamber Required. For quick turnover of molds. Oomoo® 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax.

Tin cure silicone. Oomoo® 25 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio no scale necessary. Tip: *do not cast platinum cure silicone into Oomoo silicone or any other tin cure silicone* Ultra-low viscosity casting resin with bright white color.

#ad



Smooth-On Universal Mold Release 14 fl. oz.

#ad
Smooth-On 751635700109 #ad - If you've ever been to the movies, plastics, admired a piece of sculpture, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, foams and other products to turn their ideas into 3-dimensional reality. Do not use Universal Mold Release.

Ultra-low viscosity casting resin with bright white color. Shore 70D. Keep out of the Reach of Children. Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Universal mold release is effective over a broad temperature range from 70°F to 500°F.

This product has a limited shelf life and should be used as soon as possible. It will release mold rubbers such as polyurethanes and polysulfides from properly prepared models. Cures at room temperature. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.

Smooth-On Universal Mold Release 14 fl. oz. #ad - Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. No scale required.

#ad



Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb

#ad
Smooth-on OOMOO 30 #ad - They are good for making simple one- or two-piece block molds. If material freezes, silicone base will become very thick. Technical information mixing ratio: one to one by volume 100a:130b by weight Pot Life: 30 min. Adult Supervision Required. Cures at room temperature. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.

Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb #ad - Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Shore a hardness: 30 - this scale measures the hardness of flexible rubber molds.

No scale required. Oomoo 25 - fast setting 75 minute cure time. Net weight 16 oz. Perfect for art and industrial applications - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax. Demold: 6 hrs. In. Lb.

#ad



Smooth Cast 65D Liquid Plastic Casting Resin - Trial Unit

#ad
Smooth-On, Inc. 65D #ad - Easy to use 1:1 by volume ratio. Low viscosity for easy mixing and pouring - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary. Cures at room temperature. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.

Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Smooth-cast 65d formerly smooth-Cast ROTO has a unique gradual cure profile that makes it ideal for rotational casting applications.

Smooth Cast 65D Liquid Plastic Casting Resin - Trial Unit #ad - Castings will be hollow and lightweight but have the appearance of being solid, allowing you to use less material to attain the same finished look substantially lowering your material costs. 65d can also be cast solid for a variety of industrial and art-related applications. Sets faster than Oomoo 30 Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!

Mix ratio: 1a: 1B by Volume. Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments.

#ad



Trial Unit - Smooth Cast 320 Liquid Plastic

#ad
Smooth-On, Inc. #ad - Mix ratio: 1a: 1B by Volume. The smooth-cast® 320 series consists of ultra-low viscosity casting resins that yield virtually bubble-free off-white castings. Shore 70D. Shore 70D. Easy to use 1:1 by volume ratio. Mix ratio: 1a: 1B by Volume. Cures at room temperature. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.

Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Semi-rigid plastic has good impact and abrasion resistance.

Trial Unit - Smooth Cast 320 Liquid Plastic #ad - Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Applications for smooth-cast® 320 series resins include reproducing small to medium size sculptures, decorative jewelry and taxidermy bones, antlers, special effect props, making prototype models, teeth etc.

. The smooth-cast® 320 resins are sister products to our popular Smooth-Cast® 300 Series of bright white plastics, but are easier to color using SO-Strong® or Ignite® color tints. Low viscosity for minimal bubble entrapment.

#ad



Mann Release Technologies Ease Release 200 14 fl. oz.

#ad
Mann Release Technologies ER200 #ad - Low viscosity for minimal bubble entrapment. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Mix ratio: 1a:1b by volume - easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary *Packaging may vary*.

No scale required. Oomoo 25 - fast setting 75 minute cure time. Cures at room temperature. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products. Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold.

Mann Release Technologies Ease Release 200 14 fl. oz. #ad - It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Great for craft moldmaking, replicas, jewelry, candles, home remodeling, and more!. East to use, equal parts A and B. This product will release polyurethane elastomers, polyurethane foam, platinum silicones, polyester resins, epoxy resin, rubber and thermoplastic polymers.

Mann ease release 200 Aerosol Clear Mold Release Spray. Fast Drying.

#ad



Smooth-On Rebound 25 Brush On Trial Unit Platinum Silicone Moldmaking Rubber

#ad
Smooth-On, Inc. SORebound25Kit #ad - For quick turnover of molds. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc. From cured rubber molds. Using a silicone rubber mold without release agent limits the production life. Great for craft moldmaking, home remodeling, candles, replicas, jewelry, and more!.

East to use, equal parts A and B. Adult Supervision Required. Pot life: 30 minutes, cure time: 6 hours - this product cures at room temperature with negligible shrinkage. Mann ease release 200 Aerosol Clear Mold Release Spray. Ultra-low viscosity casting resin with bright white color. Mixed 1a:1b by volume no scale necessary, rebound 25 can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a soft, flexible rubber.

Smooth-On Rebound 25 Brush On Trial Unit Platinum Silicone Moldmaking Rubber #ad - Fast Drying. Effective over a broad temperature range from 70°F to 500°F. Low viscosity for easy mixing and pouring - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary. Mix ratio: 1a: 1B by Volume. Effective on urethane, silicone and metal molds. Easy to apply.

#ad



Ages 18+ - Smooth-On Smooth-Cast 325 ColorMatch Liquid Plastic Compound Smooth Cast 325

#ad
Smooth-On SC325kit #ad - Small amounts of pigment will yield accurate, vivid colors from cured castings. Convenient one-to-one mix ratio one part A to one part B by volume. Low viscosity for easy mixing and pouring - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary. From cured rubber molds. Using a silicone rubber mold without release agent limits the production life.

Semi-rigid plastic has good impact and abrasion resistance. Effective on urethane, silicone and metal molds. Easy to apply. 10 minute demold time. Can be easily tinted with smooth-on so-strong colorants. Pot life: 30 minutes, cure time: 6 hours - this product cures at room temperature with negligible shrinkage.

Ages 18+ - Smooth-On Smooth-Cast 325 ColorMatch Liquid Plastic Compound Smooth Cast 325 #ad - Applications for smooth-cast liquid plastics include reproducing small to medium size sculptures, special effect props, cold cast bronze castings, making prototype models, roto cast pieces, and decorative jewelry. The differences between them are pot life and demold time. For quick turnover of molds. Perfect for art and industrial applications - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax.

Unique gradual cure profile that makes it ideal for rotational casting applications "roto-cast" in a machine or by hand.

#ad



20 8oz Disposable Graduated Clear Plastic Cups for Mixing Paint, Stain, Epoxy, Resin

#ad
NSI #ad - Best to store at room temperature, see "For Best Results" section below. Exothermic heat generated by curing resin can melt this cup. Shore a hardness: 30 - this scale measures the hardness of flexible rubber molds. Pot life: 30 minutes, cure time: 6 hours - this product cures at room temperature with negligible shrinkage.

Ultra-low viscosity casting resin with bright white color. From cured rubber molds. Using a silicone rubber mold without release agent limits the production life. Fast Drying. Effective over a broad temperature range from 70°F to 500°F. Mix ratio: 1a: 1B by Volume. Sets faster than Oomoo 30 Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!

20 8oz Disposable Graduated Clear Plastic Cups for Mixing Paint, Stain, Epoxy, Resin #ad - Effective on urethane, silicone and metal molds. Easy to apply. Qty 20 8oz clear plastic PET Cups with Graduated Markings. Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes.

#ad